Skip to content

Decking

Composite decking

Norcut supplies and installs capped composite decking across Greater Victoria and the Gulf Islands. Capped composite is a wood-plastic board wrapped in a hard polymer shell that resists fade, stain, and mould — the low-maintenance alternative to cedar on a wet coast. Hidden fasteners, and boards that do not splinter. Estimates on most jobs within a day.

  • Insured · WorkSafeBC registered
  • Estimates on most jobs within a day.

Installer-led · over a decade in railing systems. Locally owned · Island crews.

Capped vs uncapped, and when composite makes sense

Composite decking is a board made of wood fibre and plastic. Capped boards add a bonded polymer shell on the top and sides, which is what resists fade, stain, scratching, and mould — uncapped boards cost less but weather faster. We install capped composite with a hidden-fastener system, so there are no screw heads across the surface and the boards can move as they expand.

Composite is the right call when you want a deck you wash instead of refinish. On Vancouver Island's damp coast, cedar and pressure-treated need regular sealing and still grey out; capped composite skips that. It sits on a properly spaced joist structure — we build or correct the framing so the boards are supported and drain the way the manufacturer requires.

Materials & spec

Board
Capped composite
Fasteners
Hidden
Joist spacing
16in on centre (typical)
Resists
Fade · stain · mould
Substructure
Built or corrected to suit
On-site time
3 days on site

How it works

01Site assessmentWe check the existing framing and joist spacing, confirm what the boards need for support and drainage, and measure the deck.
02Written estimateEstimates on most jobs within a day.
03Install3 days on site. Most jobs completed within a week.

Residential & commercial

We install for homeowners and property managers, and work as a decking subcontractor for general contractors. New builds and rebuilds are covered on our deck construction page.

What it costs

Composite is priced by the square foot, and the number depends on the board line you choose, the deck area, the condition of the substructure underneath, and whether railings go in at the same time. Rather than a generic rate, we publish real completed jobs with their actual costs on our projects page, and you get an exact written estimate after the site assessment.

See completed projects →

Common questions

How much does composite decking cost per square foot in BC?

It depends on the board line, the deck area, the condition of the framing underneath, and whether railings go in at the same time. Board quality alone spans a wide range. See completed jobs with their actual costs on our projects page, and request an estimate for a figure specific to your deck.

Composite vs cedar vs pressure-treated on the coast?

Cedar and pressure-treated look good installed but need sealing and grey out in coastal damp. Capped composite costs more up front and skips the refinishing. Over years on the Island, the maintenance difference is what decides it for most people.

Does composite decking get hot or fade in BC?

Dark boards get warm in direct sun like any decking, but Vancouver Island's climate is mild and capped composite is built to resist fading. Lighter board colours stay cooler underfoot.

Does a composite deck need a railing?

If the deck surface is more than about 2ft (24in) above the ground, BC code requires a guard — 36in on decks up to about 6ft above grade, and 42in above that. We can install aluminum picket or glass railings on the same visit — one crew, one estimate.

Where we work

Greater VictoriaThe Gulf IslandsCowichan Valley
See all areas we serve →

Every job starts with a site assessment.

Request estimate
Request estimate